This is not a simple access control, this is a graphical user-defined programming support, a collection of access control and PLC programmable fun controller. Support no need to carry inductive card, mobile phone can open the door. Even if you do not install PC access control software, you can manage your access control by APP alone. We will provide you with a unique global graphical workflow programming tool, whether you are a skilled boss or a skilled staff, as long as you are familiar with the basic functions of the access control controller concept, after simple video training can quickly support workflow programming. You only need to drag and drop a few simple graphics action, you want to achieve the function according to the implementation process. All workflow functions are completed independently by the hardware, and has nothing to do with the management software. After downloading the workflow information to the controller, even if the computer shuts down the workflow function of the whole controller will not be affected at all, this is its strength.

1, processor: controller adopts 32 bit industrial processor.

2, card number: support 8 byte (Wigan 66) user card number;

3, fire fighting linkage: access control devices can communicate with each other to achieve cross control fire linkage.

4, multi-card combination: support different user card groups, different numbers, specified time, in order to open multi-card combination;

5, card reader type: support Wigan card reader and RS485 card reader, 2 card reader can be used at the same time.

6, door point interlock: support door point multi direction, two-way mutual lock or one-way interlock function;

7, I/O expansion board: it can expand a 4 input and 4 relay output expansion board.

8, the opening time: the opening time is accurate to 0.1 seconds, and the time range can be set as 0.1 seconds to 4971 days.

9, cloth / withdrawal alarm: with automatic / manual, event, I / O, password, card + password and cross-controller cloth / withdrawal;

10, transmission function: through the Ethernet access control controller RS485 output port control other RS485 related equipment;

11, bidirectional credit card status: support internal and external card reader different door state working mode;

12, card + password: each user has an independent 4~8 door password.

13, port multiplexing: it has the function of enabling "door opening button" or "gate magnetism" to prohibit or enable.

14, remote upgrade: access control firmware can be upgraded through remote network.

15, mobile APP management: support no need to carry a sensor card, a mobile phone can open; even if you do not install PC access control software, you can use APP alone to manage your access control.

Control gate number:                     4 door one-way

Number of cards:                            100 thousand

Offline event:                                  100 thousand

Communication mode:                   TCP/IP Ethernet active upload

Working voltage:                            DC 10V-15V (recommended 12V)

Working current:                            < 400mA

Working temperature:                   -20 ~ 70 degrees

Motherboard size:                         178mm * 121mm

Chassis size:                                   340mm * 253 * 70mm

Chassis power supply:                   12V/10A switching power supply

Card reader:                                   4 Wiegand card reader or 4 RS485 card reader.

Go out button:                               4

Input signal:                                   4 gate and 4 input.

Electric lock output:                       8 (4 electric locks and 4 auxiliary electric locks).